QUALITY. PRECISION. REPEATABILITY.

Quality is our first priority. Our success, past present and future, is dependent upon the high quality of our products as well as the expertise and service that we offer our customers.

SUPER DUMBBELL SYSTEM

Developed to exacting international standards and exclusive to Ontario Die International Inc., the dies utilize a unique proprietary system incorporating replaceable cutting blades, and a mechanical ejector system set in an extremely accurate die base.

Used in conjunction with either the Super Dumbbell manual or pneumatic press, they comprise the most technically advanced and only complete specimen test cutting system available today.

  • Complete die
  • 5 sets of replacement blades
  • Dimensional certificate
  • Simple tool set

  • Maintenance manual
  • Spare fasteners
  • Storage case

Hover over image for closer look
ModelStandardDrawingABCDGNR1R2R3
SDK-100JIS K6251-1 (V Tensile)Drawing120254010 ±0.140 ±0.5-2125-
SDK-100JIS K6301-1 (V Tensile)Drawing120254010 ±0.140 ±0.5-2125-
SDK-100JIS K6259 (V Ozone Degradation)Drawing
SDK-100JIS K6400-5-2 (P Tensile)Drawing
SDK-100JIS K6767: 1976 (P Tensile)Drawing
SDK-100JIS K6400-5-2 (P Tensile)Drawing120254010 ±0.140 ±0.5-2125-
SDK-100JIS K6767: 1976 (P Tensile)Drawing
SDK-200JIS K6251-2 (V Tensile)Drawing100252010 ±0.120 ±0.5-2125-
SDK-200JIS K6301-2 (V Tensile)Drawing100252010 ±0.120 ±0.5-2125-
SDK-300JIS K6251-3 (V Tensile)Drawing10025205 ±0.120 ±0.5-1125-
SDK-300JIS K6301-3 (V Tensile)Drawing10025205 ±0.120 ±0.5-1125-
SDK-300ISO 37-1A (V Tensile)Drawing10025 ±120 +2/-05 ±0.120 ±0.5-11 ±125 ±2-
SDK-300DIN 53504-S1A (V Tensile)Drawing10025205 ±0.0525-1125-
SDK-300JIS K7311 (P Tensile)Drawing
SDK-300ISO 37-1A (V Tensile)Drawing10025 ±120 +2/-05 ±0.120 ±0.5-11 ±125 ±2-
SDK-300DIN 53504-S1A (V Tensile)Drawing10025205 ±0.0525-1125-
SDK-400JIS K6251-4 (V Tensile)Drawing10015205 ±0.120 ±0.5-40--
SDK-400JIS K6301-4 (V Tensile)Drawing10015205 ±0.120 ±0.5-40--
SDK-500JIS K6251-5 (V Tensile)Drawing11525336 +0.4/-025 ±0.5-1425-
SDK-500ISO 37-1 (V Tensile)Drawing11525 ±133 ±26 +0.4/-025 ±0.5-14 ±125 ±2-
SDK-500JIS K7113-2 (Abolished in 2010) (P Tensile)Drawing11525 ±133 ±26 ±0.425 ±1-14 ±125 ±2-
SDK-500JIS K7127 Type 5 (P Tensile)Drawing11525 ±133 ±26 ±0.425 ±0.25-14 ±125 ±2-
SDK-500JIS K7137-2-B (PTFE Tensile)Drawing1152533625-1425-
SDK-500ISO 37-1 (V Tensile)Drawing11525 ±133 ±26 +0.4/-025 ±0.5-14 ±125 ±2-
SDK-600JIS K6732 (Polyvinyl Chloride Film for Agriculture / Tensile)Drawing12025 ±140 +2/-010 +0.4/-040 +2/-0-14 ±125 ±1-
SDK-600JIS K6781 (P Tensile)Drawing12025401040-1425-
SDK-600JIS K6783 (P Tensile)Drawing12025 ±140 +2/-010 +0.4/-040 +2/-0-14 ±125 ±1-
SDK-600JIS Z1702 (P Tensile)Drawing12025 ±140 +2/-010 +0.4/-040 +2/-0-14 ±125 ±1-
SDMK-1000JIS K6251-6 (V Tensile)Drawing75
12.5254 ±0.120 ±0.5-812.5-
SDMK-1000ISO 37-2 (V Tensile)Drawing7512.5 ±125 ±14 ±0.120 ±0.5-8 ±0.512.5 ±1-
SDMK-1000DIN 53504-S2 (V Tensile)Drawing7512.5254 ±0.0520-812.5-
SDMK-1000JIS K7162-5A (P Tensile)Drawing7512.5 ±125 ±14 ±0.120 ±0.5-8 ±0.512.5 ±1-
SDMK-1000ISO 527-2-5A (P Tensile)Drawing7512.5 ±125 ±14 ±0.120 ±0.5-8 ±0.512.5 ±1-
SDMK-1000BS 6746 (L)Drawing7512.5 ±125 ±14 ±0.120 ±0.1-8 ±0.512.5 ±1-
SDMK-1000IEC 540 (L)Drawing7512.5254 ±0.120 ±0.1-8 ±0.512.5-
SDMK-1000JIS K6251-8 (V Tensile)Drawing508.5164 ±0.110 ±0.5-7.510-
SDMK-1000ISO 37-3 (V Tensile)Drawing508.5 ±0.516 ±14 ±0.110 ±0.5-7.5 ±0.510 ±0.5-
SDMK-1000DIN 53504-S3A (V Tensile)Drawing508.5164 ±0.0510-7.510-
SDMK-1000JIS K7139-A1 (P Tensile)Drawing
SDMK-1000JIS K7162-1A (P Tensile)Drawing15020 ±0.280 ±210 ±0.250 ±0.5-20~25--
SDMK-1000ISO 527-2-1A (P Tensile)Drawing15020 ±0.280 ± 10 ±0.250 ±0.5-20~25--
SDMK-1000JIS K7113-1 (Abolished in 2010) (P Tensile)Drawing17520 ±0.560 ±0.510 ±0.550 ±0.5-60--
SDMK-1000JIS K7127 Type1B (P Tensile)Drawing15020 ±0.560 ±0.510 ±0.250 ±0.5-60--
SDMK-1000JIS K7139-A2 and K7139-A3 (P Tensile)Drawing
SDMK-1000JIS K7162-1B (P Tensile)Drawing15020 ±0.260 ±0.510 ±0.250 ±0.5-60--
SDMK-1000ISO 527-2-1B (P Tensile)Drawing15020 ±0.260 ±0.510 ±0.250 ±0.5-60--
SDMK-1000JIS K7139-A22 (P Tensile)Drawing
SDMK-1000JIS K7162-1BA (P Tensile)Drawing7510 ±0.530 ±0.55 ±0.525 ±0.5-30--
SDMK-1000ISO 527-2-1BA (P Tensile)Drawing7510 ±0.530 ±0.55 ±0.525 ±0.5-30--
SDMK-1000JIS K7160-2 (P Tensile Impact)Drawing60 ±110 ±0.210 ±0.23 ±0.05--10 ±1--
SDMK-1000JIS K7139-CP21, K7139-CP22, K7139-CP23 (P Tensile)Drawing
SDMK-1000ISO 8256-2 (P Tensile Impact)Drawing
SDMK-1000JIS K7160-3 (P Tensile Impact)Drawing80 ±215 ±0.510 ±0.21010-20--
SDMK-1000ISO 8256-3 (P Tensile Impact)Drawing
SDMK-1000JIS K7160-4 (P Tensile Impact)Drawing60 ±110 ±0.2-3 ±0.1--15 ±1--
SDMK-1000JIS K7139-CW21, K7139-CW22, K7139-CW23 (P tensile)Drawing
SDMK-1000ISO 8256-4 (P Tensile Impact)Drawing
SDMK-1000JIS K7137-2-A (PTFE Tensile)Drawing381522522-5--
SDMK-1000JIS K6935-2 (Fluoropolymer / Tensile)Drawing
SDMK-1000JIS K6897 (4-Thylene Fluoride Resin Pipe / Tensile)(Abolished in 2004)Drawing6015.922.254.7522.25-3.2--
SDMK-1000JIS K6400-5-1 (P Tensile)Drawing
SDMK-1000JIS K6767: 1999 (P Tensile)Drawing15225551325 or 50-1313-
SDMK-1000ISO 1798Drawing15225551325 or 50-1313-
SDMK-1000JIS K6402 (Soft Urethane Form for Cloths / Tensile)(Abolished in 2000)Drawing15040502040-2525-
SDMK-1000JIS Z2201-5 (Metal Foil / Tensile)DrawingIrregular30602550-20~30--
SDMK-1000JIS Z2201-13B (Metal Foil / Tensile)DrawingIrregular20~6012.550-20~30--
SDMK-1000ASTM D638-Ⅰ (P Tensile)Drawing16519 +6.4/-057 ±0.513 ±0.550 ±0.25-76 ±1--
SDMK-1000ASTM D638-Ⅱ (P Tensile)Drawing18319 +6.4/-057 ±0.56 ±0.557 ±0.25-76 ±1--
SDMK-1000ASTM D638-Ⅲ (P Tensile)Drawing24629 +6.4/-057 ±0.519 ±0.557 ±0.25-76 ±1--
SDMK-1000ASTM D638-Ⅳ (P Tensile)Drawing11519 +6.4/-033 ±0.56 ±0.0525 ±0.13-14 ±125 ±1-
SDMK-1000ASTM D1708Drawing381522 ±0.255 ±0.2522 ±0.25-5 ±0.5--
SDMK-1000ASTM D2116Drawing381522 ±0.255 ±0.2522 ±0.25-5 ±0.5--
SDMK-1000ASTM D4894Drawing381522 ±0.255 ±0.2522 ±0.25-5 ±0.5--
SDMK-1000ASTM D4895 (PTFE Tensile)Drawing
SDMK-1000JIS K7137-2-A (PTFE Tensile)Drawing
SDMK-1000JIS K6935-2 (Fluoropolymer Tensile)Drawing
SDMK-1000ISO 37-2 (V Tensile)Drawing7512.5 ±125 ±14 ±0.120 ±0.5-8 ±0.512.5 ±1-
SDMK-1000ISO 37-3 (V Tensile)Drawing508.5 ±0.516 ±14 ±0.110 ±0.5-7.5 ±0.510 ±0.5-
SDMK-1000ISO 1798 (P Tensile)Drawing15225551325 or 50-1313-
SDMK-1000DIN 53504-S2 (V Tensile)Drawing7512.5254 ±0.0520-812.5-
SDMK-1000DIN 53504-S3A (V Tensile)Drawing508.5164 ±0.0510-7.510-
SDMK-1000IEC 540(L)Drawing7512.5254 ±0.120 ±0.1-8 ±0.512.5-
SDMK-1000IEC 540 (S)Drawing508.5174 ±0.110 ±0.1-7.510-
SDMK-100AASTM D412-A (V Tensile)Drawing14025 ±159 ±212 +0.05/-050 ±0.5-14 ±125 ±2-
SDMK-100BASTM D412-B (V Tensile)Drawing14025 ±159 ±26 +0.05/-050 ±0.5-14 ±125 ±2-
SDMK-100CASTM D412-C (V Tensile)Drawing11525 ±133 ±26 +0.05/-025 ±0.25-14 ±125 ±2-
SDMK-100CDIN 53504-S1 (V Tensile)Drawing11525336 ±0.0525-1425-
SDMK-100CDIN 53504-S1 (V Tensile)Drawing11525336 ±0.0525-1425-
SDMK-100FASTM D412-F (V Tensile)Drawing12516 ±159 ±26 +0.05/-050 ±0.5-14 ±116 ±2-
SDMK-100LASTM D638-Ⅴ (P Tensile)Drawing63.59.53 +3.18/-09.53 ±0.083.18 ±0.037.62 ±0.02-12.7 ±0.08--
SDMK-100LASTM D1822-L (P Tensile Impact)Drawing63.59.539.53 ±0.083.18 ±0.039.53 ±0.08-12.7 ±0.08--
SDMK-100LASTM D1822-L (P Tensile Impact)Drawing63.59.539.53 ±0.083.18 ±0.039.53 ±0.08-12.7 ±0.08--
SDMK-100LASTM D638-Ⅴ (P Tensile)Drawing63.59.53 +3.18/-09.53 ±0.083.18 ±0.037.62 ±0.02-12.7 ±0.08--
SDMK-100SASTM D1822-S (P Tensile Impact)Drawing63.59.530/12.7R3.18 ±0.03--12.7 ±0.08--
SDMP-1000JIS K6251-7 (V Tensile)Drawing356122 ±0.110 ±0.5-33-
SDMP-1000ISO 37-4 (V Tensile)Drawing356 ±0.512 ±0.52 ±0.110 ±0.5-3 ±0.13 ±0.1-
SDMP-1000DIN 53504-S3 (V Tensile)Drawing356122 ±0.0510-33-
SDMP-1000JIS K7162-5B (P Tensile)Drawing
SDMP-1000ISO 527-2-5B (P Tensile)Drawing
SDMP-1000JIS K6259 I-shaped (V Ozone Degradation)Drawing636.5502 ±0.2--1--
SDMP-1000JIS K6261 I-shaped (V TR)Drawing
SDMP-1000JIS K6273 I-shaped (V Tension Set)Drawing38~636.523~482 ±0.2--1--
SDMP-1000ISO 2285Drawing38~636.523~482 ±0.2--1--
SDMP-1000JIS K7139-A23 (P Tensile)Drawing607.2353.524-8.8--
SDMP-1000JIS K7139-A24 (P Tensile)Drawing45527.52.520-6.3--
SDMP-1000JIS K7139-A25 (P Tensile)Drawing
SDMP-1000JIS K7162-1BB (P Tensile)Drawing304 ±0.212 ±0.52 ±0.210 ±0.2-12--
SDMP-1000ISO 527-2-1BB (P Tensile)Drawing304 ±0.212 ±0.52 ±0.210 ±0.2-12--
SDMP-1000ASTM D1329 I-shaped (V TR test)Drawing37.86.425225----
SDMP-1000ASTM D1329 I-shaped (V TR test)Drawing50.86.438238----
SDMP-1000ASTM D1329 I-shaped (V TR test)Drawing63.86.451251----
SDMP-1000ISO 37-4 (V Tensile)Drawing356 ±0.512 ±0.52 ±0.110 ±0.5-3 ±0.13 ±0.1-
SDMP-1000ISO 2285 (V Tensile Permanent Set)Drawing38~636.523~482 ±0.2--1--
SDMP-1000DIN 53504-S3 (V Tensile)Drawing356122 ±0.0510-33-
SDMP-100DASTM D412-D (V Tensile)Drawing10016 ±133 ±23 +0.05/-025 ±0.25-14 ±116 ±2-
SDMP-100EASTM D412-E( V Tensile)Drawing12516 ±159 ±23 +0.05/-050 ±0.5-14 ±116 ±2-
SDAK-1000JIS K6301-A (V Tear)11025-10-0.5 ±0.084412.510
SDBK-1000JIS K6301-B (V Tear)Drawing1002090° -
--13.52020
SDBK-1000JIS K7128-3 Right Angled Tear (P Tear)Drawing10020 ±190°---13.5 +0.5/-020 ±120 ±1
SDBK-1000JIS K6732 Right Angled Tear (P Tear)Drawing10020 ±190°---13.5 +0.5/-020 ±120 ±1
SDBK-1000JIS K6767 (P Tear)Drawing1002090°---13.52020
SDBK-1000JIS K6781 (P Tear)Drawing1002090°---13.52020
SDBK-1000JIS K6783 (P Tear)Drawing10020 ±190°---13.5 +0.5/-020 ±120 ±1
SDBK-1000JIS K7311(P Tear)Drawing1002090°---13.52020
SDMBK-1000JIS K6252-Without Nick Angle-Shaped (V Tear)Drawing10019 ±0.0590°---12.7 ±0.0525 ±0.0519 ±0.05
SDMBK-1000ISO 34-1 (V Tear)Drawing10019 ±0.0590°---12.7 ±0.0525 ±0.0519 ±0.05
SDMBK-1000JIS K6400-5-4 (P Tear)Drawing
SDMBK-1000NJIS K6252-With Nick Angle-Shaped (V Tear)Drawing10019 ±0.0590°--1 ±0.212.7 ±0.0525 ±0.0519 ±0.05
SDMBK-1000NISO 34-1 (V Tear)Drawing10019 ±0.0590°---12.7 ±0.0525 ±0.0519 ±0.05
SDMK-1000CASTM D624-C (V Tear)Drawing102 ±0.519 ±0.0590°---12.7 ±0.0525 ±0.0519 ±0.05
SDMK-1000CASTM D1004 (P Tear)Drawing
SDMAK-1000JIS K6252-Crescent Shaped (V Tear)Drawing11025 ±0.5-10.5 ±0.05-1 ±0.243 ±0.212.5 ±0.19 ±0.2
SDMAK-1000ISO 34-1 (V Tear)Drawing11025 ±0.5-10.5 ±0.05-1 ±0.243 ±0.212.5 ±0.19 ±0.2
SDMK-1000BASTM D624-B (V Tear)Drawing110 ±0.525 ±0.05-10.2 ±0.05-0.5 ±0.0543 ±0.0512.5 ±0.059 ±0.05
SSK-1000NJIS K6252Drawing10015 ±17.5 ±0.57.5 ±0.540 ±5
SSK-1000NISO 34-1Drawing10015 ±17.5 ±0.57.5 ±0.540 ±5
SSK-1000NJIS K7128-115050252575 ±1
SSK-1000NJIS K677215040202075
SSK-1000NASTM D62415015 ±17.5 ±0.57.5 ±0.540 ±5
SSK-1000NEN 38810050252550
SSK-701JIS K6732Drawing6376
SSK-701NJIS K6732Drawing6376383820
SSK-701NJIS K7128-2Drawing637537.537.520
Hover over image for closer look
ModelStandardDrawingABCDGNR1R2R3
SDK-100JIS K6251-1 (V Tensile)Drawing120254010 ±0.140 ±0.5-2125-
SDK-100JIS K6301-1 (V Tensile)Drawing120254010 ±0.140 ±0.5-2125-
SDK-100JIS K6259 (V Ozone Degradation)Drawing
SDK-100JIS K6400-5-2 (P Tensile)Drawing
SDK-100JIS K6767: 1976 (P Tensile)Drawing
SDK-100JIS K6400-5-2 (P Tensile)Drawing120254010 ±0.140 ±0.5-2125-
SDK-100JIS K6767: 1976 (P Tensile)Drawing
SDK-200JIS K6251-2 (V Tensile)Drawing100252010 ±0.120 ±0.5-2125-
SDK-200JIS K6301-2 (V Tensile)Drawing100252010 ±0.120 ±0.5-2125-
SDK-300JIS K6251-3 (V Tensile)Drawing10025205 ±0.120 ±0.5-1125-
SDK-300JIS K6301-3 (V Tensile)Drawing10025205 ±0.120 ±0.5-1125-
SDK-300ISO 37-1A (V Tensile)Drawing10025 ±120 +2/-05 ±0.120 ±0.5-11 ±125 ±2-
SDK-300DIN 53504-S1A (V Tensile)Drawing10025205 ±0.0525-1125-
SDK-300JIS K7311 (P Tensile)Drawing
SDK-300ISO 37-1A (V Tensile)Drawing10025 ±120 +2/-05 ±0.120 ±0.5-11 ±125 ±2-
SDK-300DIN 53504-S1A (V Tensile)Drawing10025205 ±0.0525-1125-
SDK-400JIS K6251-4 (V Tensile)Drawing10015205 ±0.120 ±0.5-40--
SDK-400JIS K6301-4 (V Tensile)Drawing10015205 ±0.120 ±0.5-40--
SDK-500JIS K6251-5 (V Tensile)Drawing11525336 +0.4/-025 ±0.5-1425-
SDK-500ISO 37-1 (V Tensile)Drawing11525 ±133 ±26 +0.4/-025 ±0.5-14 ±125 ±2-
SDK-500JIS K7113-2 (Abolished in 2010) (P Tensile)Drawing11525 ±133 ±26 ±0.425 ±1-14 ±125 ±2-
SDK-500JIS K7127 Type 5 (P Tensile)Drawing11525 ±133 ±26 ±0.425 ±0.25-14 ±125 ±2-
SDK-500JIS K7137-2-B (PTFE Tensile)Drawing1152533625-1425-
SDK-500ISO 37-1 (V Tensile)Drawing11525 ±133 ±26 +0.4/-025 ±0.5-14 ±125 ±2-
SDK-600JIS K6732 (Polyvinyl Chloride Film for Agriculture / Tensile)Drawing12025 ±140 +2/-010 +0.4/-040 +2/-0-14 ±125 ±1-
SDK-600JIS K6781 (P Tensile)Drawing12025401040-1425-
SDK-600JIS K6783 (P Tensile)Drawing12025 ±140 +2/-010 +0.4/-040 +2/-0-14 ±125 ±1-
SDK-600JIS Z1702 (P Tensile)Drawing12025 ±140 +2/-010 +0.4/-040 +2/-0-14 ±125 ±1-
SDMK-1000JIS K6251-6 (V Tensile)Drawing75
12.5254 ±0.120 ±0.5-812.5-
SDMK-1000ISO 37-2 (V Tensile)Drawing7512.5 ±125 ±14 ±0.120 ±0.5-8 ±0.512.5 ±1-
SDMK-1000DIN 53504-S2 (V Tensile)Drawing7512.5254 ±0.0520-812.5-
SDMK-1000JIS K7162-5A (P Tensile)Drawing7512.5 ±125 ±14 ±0.120 ±0.5-8 ±0.512.5 ±1-
SDMK-1000ISO 527-2-5A (P Tensile)Drawing7512.5 ±125 ±14 ±0.120 ±0.5-8 ±0.512.5 ±1-
SDMK-1000BS 6746 (L)Drawing7512.5 ±125 ±14 ±0.120 ±0.1-8 ±0.512.5 ±1-
SDMK-1000IEC 540 (L)Drawing7512.5254 ±0.120 ±0.1-8 ±0.512.5-
SDMK-1000JIS K6251-8 (V Tensile)Drawing508.5164 ±0.110 ±0.5-7.510-
SDMK-1000ISO 37-3 (V Tensile)Drawing508.5 ±0.516 ±14 ±0.110 ±0.5-7.5 ±0.510 ±0.5-
SDMK-1000DIN 53504-S3A (V Tensile)Drawing508.5164 ±0.0510-7.510-
SDMK-1000JIS K7139-A1 (P Tensile)Drawing
SDMK-1000JIS K7162-1A (P Tensile)Drawing15020 ±0.280 ±210 ±0.250 ±0.5-20~25--
SDMK-1000ISO 527-2-1A (P Tensile)Drawing15020 ±0.280 ± 10 ±0.250 ±0.5-20~25--
SDMK-1000JIS K7113-1 (Abolished in 2010) (P Tensile)Drawing17520 ±0.560 ±0.510 ±0.550 ±0.5-60--
SDMK-1000JIS K7127 Type1B (P Tensile)Drawing15020 ±0.560 ±0.510 ±0.250 ±0.5-60--
SDMK-1000JIS K7139-A2 and K7139-A3 (P Tensile)Drawing
SDMK-1000JIS K7162-1B (P Tensile)Drawing15020 ±0.260 ±0.510 ±0.250 ±0.5-60--
SDMK-1000ISO 527-2-1B (P Tensile)Drawing15020 ±0.260 ±0.510 ±0.250 ±0.5-60--
SDMK-1000JIS K7139-A22 (P Tensile)Drawing
SDMK-1000JIS K7162-1BA (P Tensile)Drawing7510 ±0.530 ±0.55 ±0.525 ±0.5-30--
SDMK-1000ISO 527-2-1BA (P Tensile)Drawing7510 ±0.530 ±0.55 ±0.525 ±0.5-30--
SDMK-1000JIS K7160-2 (P Tensile Impact)Drawing60 ±110 ±0.210 ±0.23 ±0.05--10 ±1--
SDMK-1000JIS K7139-CP21, K7139-CP22, K7139-CP23 (P Tensile)Drawing
SDMK-1000ISO 8256-2 (P Tensile Impact)Drawing
SDMK-1000JIS K7160-3 (P Tensile Impact)Drawing80 ±215 ±0.510 ±0.21010-20--
SDMK-1000ISO 8256-3 (P Tensile Impact)Drawing
SDMK-1000JIS K7160-4 (P Tensile Impact)Drawing60 ±110 ±0.2-3 ±0.1--15 ±1--
SDMK-1000JIS K7139-CW21, K7139-CW22, K7139-CW23 (P tensile)Drawing
SDMK-1000ISO 8256-4 (P Tensile Impact)Drawing
SDMK-1000JIS K7137-2-A (PTFE Tensile)Drawing381522522-5--
SDMK-1000JIS K6935-2 (Fluoropolymer / Tensile)Drawing
SDMK-1000JIS K6897 (4-Thylene Fluoride Resin Pipe / Tensile)(Abolished in 2004)Drawing6015.922.254.7522.25-3.2--
SDMK-1000JIS K6400-5-1 (P Tensile)Drawing
SDMK-1000JIS K6767: 1999 (P Tensile)Drawing15225551325 or 50-1313-
SDMK-1000ISO 1798Drawing15225551325 or 50-1313-
SDMK-1000JIS K6402 (Soft Urethane Form for Cloths / Tensile)(Abolished in 2000)Drawing15040502040-2525-
SDMK-1000JIS Z2201-5 (Metal Foil / Tensile)DrawingIrregular30602550-20~30--
SDMK-1000JIS Z2201-13B (Metal Foil / Tensile)DrawingIrregular20~6012.550-20~30--
SDMK-1000ASTM D638-Ⅰ (P Tensile)Drawing16519 +6.4/-057 ±0.513 ±0.550 ±0.25-76 ±1--
SDMK-1000ASTM D638-Ⅱ (P Tensile)Drawing18319 +6.4/-057 ±0.56 ±0.557 ±0.25-76 ±1--
SDMK-1000ASTM D638-Ⅲ (P Tensile)Drawing24629 +6.4/-057 ±0.519 ±0.557 ±0.25-76 ±1--
SDMK-1000ASTM D638-Ⅳ (P Tensile)Drawing11519 +6.4/-033 ±0.56 ±0.0525 ±0.13-14 ±125 ±1-
SDMK-1000ASTM D1708Drawing381522 ±0.255 ±0.2522 ±0.25-5 ±0.5--
SDMK-1000ASTM D2116Drawing381522 ±0.255 ±0.2522 ±0.25-5 ±0.5--
SDMK-1000ASTM D4894Drawing381522 ±0.255 ±0.2522 ±0.25-5 ±0.5--
SDMK-1000ASTM D4895 (PTFE Tensile)Drawing
SDMK-1000JIS K7137-2-A (PTFE Tensile)Drawing
SDMK-1000JIS K6935-2 (Fluoropolymer Tensile)Drawing
SDMK-1000ISO 37-2 (V Tensile)Drawing7512.5 ±125 ±14 ±0.120 ±0.5-8 ±0.512.5 ±1-
SDMK-1000ISO 37-3 (V Tensile)Drawing508.5 ±0.516 ±14 ±0.110 ±0.5-7.5 ±0.510 ±0.5-
SDMK-1000ISO 1798 (P Tensile)Drawing15225551325 or 50-1313-
SDMK-1000DIN 53504-S2 (V Tensile)Drawing7512.5254 ±0.0520-812.5-
SDMK-1000DIN 53504-S3A (V Tensile)Drawing508.5164 ±0.0510-7.510-
SDMK-1000IEC 540(L)Drawing7512.5254 ±0.120 ±0.1-8 ±0.512.5-
SDMK-1000IEC 540 (S)Drawing508.5174 ±0.110 ±0.1-7.510-
SDMK-100AASTM D412-A (V Tensile)Drawing14025 ±159 ±212 +0.05/-050 ±0.5-14 ±125 ±2-
SDMK-100BASTM D412-B (V Tensile)Drawing14025 ±159 ±26 +0.05/-050 ±0.5-14 ±125 ±2-
SDMK-100CASTM D412-C (V Tensile)Drawing11525 ±133 ±26 +0.05/-025 ±0.25-14 ±125 ±2-
SDMK-100CDIN 53504-S1 (V Tensile)Drawing11525336 ±0.0525-1425-
SDMK-100CDIN 53504-S1 (V Tensile)Drawing11525336 ±0.0525-1425-
SDMK-100FASTM D412-F (V Tensile)Drawing12516 ±159 ±26 +0.05/-050 ±0.5-14 ±116 ±2-
SDMK-100LASTM D638-Ⅴ (P Tensile)Drawing63.59.53 +3.18/-09.53 ±0.083.18 ±0.037.62 ±0.02-12.7 ±0.08--
SDMK-100LASTM D1822-L (P Tensile Impact)Drawing63.59.539.53 ±0.083.18 ±0.039.53 ±0.08-12.7 ±0.08--
SDMK-100LASTM D1822-L (P Tensile Impact)Drawing63.59.539.53 ±0.083.18 ±0.039.53 ±0.08-12.7 ±0.08--
SDMK-100LASTM D638-Ⅴ (P Tensile)Drawing63.59.53 +3.18/-09.53 ±0.083.18 ±0.037.62 ±0.02-12.7 ±0.08--
SDMK-100SASTM D1822-S (P Tensile Impact)Drawing63.59.530/12.7R3.18 ±0.03--12.7 ±0.08--
SDMP-1000JIS K6251-7 (V Tensile)Drawing356122 ±0.110 ±0.5-33-
SDMP-1000ISO 37-4 (V Tensile)Drawing356 ±0.512 ±0.52 ±0.110 ±0.5-3 ±0.13 ±0.1-
SDMP-1000DIN 53504-S3 (V Tensile)Drawing356122 ±0.0510-33-
SDMP-1000JIS K7162-5B (P Tensile)Drawing
SDMP-1000ISO 527-2-5B (P Tensile)Drawing
SDMP-1000JIS K6259 I-shaped (V Ozone Degradation)Drawing636.5502 ±0.2--1--
SDMP-1000JIS K6261 I-shaped (V TR)Drawing
SDMP-1000JIS K6273 I-shaped (V Tension Set)Drawing38~636.523~482 ±0.2--1--
SDMP-1000ISO 2285Drawing38~636.523~482 ±0.2--1--
SDMP-1000JIS K7139-A23 (P Tensile)Drawing607.2353.524-8.8--
SDMP-1000JIS K7139-A24 (P Tensile)Drawing45527.52.520-6.3--
SDMP-1000JIS K7139-A25 (P Tensile)Drawing
SDMP-1000JIS K7162-1BB (P Tensile)Drawing304 ±0.212 ±0.52 ±0.210 ±0.2-12--
SDMP-1000ISO 527-2-1BB (P Tensile)Drawing304 ±0.212 ±0.52 ±0.210 ±0.2-12--
SDMP-1000ASTM D1329 I-shaped (V TR test)Drawing37.86.425225----
SDMP-1000ASTM D1329 I-shaped (V TR test)Drawing50.86.438238----
SDMP-1000ASTM D1329 I-shaped (V TR test)Drawing63.86.451251----
SDMP-1000ISO 37-4 (V Tensile)Drawing356 ±0.512 ±0.52 ±0.110 ±0.5-3 ±0.13 ±0.1-
SDMP-1000ISO 2285 (V Tensile Permanent Set)Drawing38~636.523~482 ±0.2--1--
SDMP-1000DIN 53504-S3 (V Tensile)Drawing356122 ±0.0510-33-
SDMP-100DASTM D412-D (V Tensile)Drawing10016 ±133 ±23 +0.05/-025 ±0.25-14 ±116 ±2-
SDMP-100EASTM D412-E( V Tensile)Drawing12516 ±159 ±23 +0.05/-050 ±0.5-14 ±116 ±2-
Hover over image for closer look
ModelStandardDrawingABCDGNR1R2R3
SDAK-1000JIS K6301-A (V Tear)11025-10-0.5 ±0.084412.510
SDBK-1000JIS K6301-B (V Tear)Drawing1002090° -
--13.52020
SDBK-1000JIS K7128-3 Right Angled Tear (P Tear)Drawing10020 ±190°---13.5 +0.5/-020 ±120 ±1
SDBK-1000JIS K6732 Right Angled Tear (P Tear)Drawing10020 ±190°---13.5 +0.5/-020 ±120 ±1
SDBK-1000JIS K6767 (P Tear)Drawing1002090°---13.52020
SDBK-1000JIS K6781 (P Tear)Drawing1002090°---13.52020
SDBK-1000JIS K6783 (P Tear)Drawing10020 ±190°---13.5 +0.5/-020 ±120 ±1
SDBK-1000JIS K7311(P Tear)Drawing1002090°---13.52020
SDMBK-1000JIS K6252-Without Nick Angle-Shaped (V Tear)Drawing10019 ±0.0590°---12.7 ±0.0525 ±0.0519 ±0.05
SDMBK-1000ISO 34-1 (V Tear)Drawing10019 ±0.0590°---12.7 ±0.0525 ±0.0519 ±0.05
SDMBK-1000JIS K6400-5-4 (P Tear)Drawing
SDMBK-1000NJIS K6252-With Nick Angle-Shaped (V Tear)Drawing10019 ±0.0590°--1 ±0.212.7 ±0.0525 ±0.0519 ±0.05
SDMBK-1000NISO 34-1 (V Tear)Drawing10019 ±0.0590°---12.7 ±0.0525 ±0.0519 ±0.05
SDMK-1000CASTM D624-C (V Tear)Drawing102 ±0.519 ±0.0590°---12.7 ±0.0525 ±0.0519 ±0.05
SDMK-1000CASTM D1004 (P Tear)Drawing
Hover over image for closer look
ModelStandardDrawingABCDGNR1R2R3
SDMAK-1000JIS K6252-Crescent Shaped (V Tear)Drawing11025 ±0.5-10.5 ±0.05-1 ±0.243 ±0.212.5 ±0.19 ±0.2
SDMAK-1000ISO 34-1 (V Tear)Drawing11025 ±0.5-10.5 ±0.05-1 ±0.243 ±0.212.5 ±0.19 ±0.2
SDMK-1000BASTM D624-B (V Tear)Drawing110 ±0.525 ±0.05-10.2 ±0.05-0.5 ±0.0543 ±0.0512.5 ±0.059 ±0.05
Hover over image for closer look
ModelStandardDrawingABCDGNR1R2R3
SSK-1000NJIS K6252Drawing10015 ±17.5 ±0.57.5 ±0.540 ±5
SSK-1000NISO 34-1Drawing10015 ±17.5 ±0.57.5 ±0.540 ±5
SSK-1000NJIS K7128-115050252575 ±1
SSK-1000NJIS K677215040202075
SSK-1000NASTM D62415015 ±17.5 ±0.57.5 ±0.540 ±5
SSK-1000NEN 38810050252550
SSK-701JIS K6732Drawing6376
SSK-701NJIS K6732Drawing6376383820
SSK-701NJIS K7128-2Drawing637537.537.520

CAREERS

Locations

Ontario Die International is a global company with offices located around the world including Canada, the United States, Mexico and the Czech Republic.

Awards

  • Chamber of Commerce Award of Excellence
  • GTO 9000 Quality Award
  • Canadian Awards for Business Excellence
  • Lear Corporation Supplier Hall of Fame Finalist